What are IPAP (Inspiratory Positive Airway Pressure) and EPAP (Expiratory Positive Airway Pressure) in a ventilator?

Medical Advisory BoardAll articles are reviewed for accuracy by our Medical Advisory Board
Educational purpose only • Exercise caution as content is pending human review
Article Review Status
Submitted
Under Review
Approved

Last updated: April 11, 2026 • View editorial policy

Have a follow-up question?

Our Medical A.I. is used by practicing medical doctors at top research institutions around the world. Ask any follow up question and get world-class guideline-backed answers instantly.

IPAP and EPAP in Ventilators

IPAP (Inspiratory Positive Airway Pressure) is the higher pressure delivered during inspiration that produces ventilation, while EPAP (Expiratory Positive Airway Pressure) is the lower pressure maintained during expiration that recruits underventilated lung, offsets intrinsic PEEP, and facilitates exhalation. 1

Understanding the Bi-Level Pressure System

In non-invasive ventilation (NIV), these two pressures work together as bi-level pressure support:

  • IPAP generates the tidal volume by providing the inspiratory pressure needed to inflate the lungs
  • EPAP serves multiple critical functions: it recruits collapsed alveoli (similar to PEEP in intubated patients), counterbalances intrinsic PEEP (particularly beneficial in COPD patients for triggering), and maintains continuous flow to vent exhaled gas through the exhaust port 1

The difference between IPAP and EPAP equals the pressure support (PS) - this is what actually drives ventilation 2. For example, if IPAP is 15 cm H₂O and EPAP is 5 cm H₂O, the pressure support is 10 cm H₂O.

Clinical Impact on Ventilation

Increasing EPAP while maintaining the same IPAP will reduce tidal volume. Research demonstrates that adding 5 cm H₂O of EPAP reduces mean tidal volume by 167 ml, while 10 cm H₂O reduces it by 367 ml 3. This occurs because the effective pressure support (IPAP minus EPAP) decreases.

Therefore, if you need to increase ventilation, you have two options:

  • Increase IPAP (increases pressure support)
  • Decrease EPAP (increases pressure support)
  • Or both

Typical Settings

Standard EPAP levels range from 3-5 cm H₂O 1. The minimum EPAP of 3 cm H₂O is required to adequately vent exhaled air through the exhalation port 2. However, these standard levels may not completely eliminate rebreathing during bi-level pressure support, especially when respiratory frequency increases 1.

Important Clinical Caveats

Watch for exhaust port occlusion - if the exhalation port becomes blocked (by secretions, for example), rebreathing can worsen hypercapnia 1. Always verify proper functioning of exhalation ports or valves.

In COPD patients with intrinsic PEEP, EPAP can reduce ventilatory work by offsetting auto-PEEP, which improves triggering and may slow respiratory rate while increasing alveolar ventilation 1.

EPAP increases end-expiratory lung volume but does not necessarily reduce work of breathing - in fact, EPAP alone can increase work of breathing indices. The reduction in work comes primarily from the IPAP component 4.

Professional Medical Disclaimer

This information is intended for healthcare professionals. Any medical decision-making should rely on clinical judgment and independently verified information. The content provided herein does not replace professional discretion and should be considered supplementary to established clinical guidelines. Healthcare providers should verify all information against primary literature and current practice standards before application in patient care. Dr.Oracle assumes no liability for clinical decisions based on this content.