Aortic Valve Area Location in Echocardiography Report
The aortic valve area measurements are clearly documented in your report with three different calculation methods: AV area planimetry = 2.08 cm², AV area cont VTI = 2.1 cm², and AV area pk vel = 2.0 cm².
Specific Location of Measurements
The aortic valve area values appear in the middle section of your echocardiography data:
- Final AV area planimetry: 2.08 cm² (direct measurement by tracing the valve opening)
- Final AV area cont VTI: 2.1 cm² (calculated using continuity equation with velocity time integral)
- Final AV area pk vel: 2.0 cm² (calculated using peak velocity method)
Clinical Interpretation
These measurements indicate mild aortic stenosis, not severe stenosis 1, 2. According to ACC/AHA guidelines, severe aortic stenosis is defined by:
- Aortic valve area ≤1.0 cm²
- Mean gradient ≥40 mmHg
- Peak velocity ≥4 m/s
Your values show:
- Aortic valve area: ~2.0-2.1 cm² (well above severe threshold)
- Mean gradient: 14 mmHg (below severe threshold of 40 mmHg)
- Peak velocity: 255 cm/s = 2.55 m/s (below severe threshold of 4 m/s)
Key Measurements Supporting Mild Stenosis
The dimensionless index (velocity ratio) of 0.60 further confirms mild stenosis 1, 2. A ratio ≤0.25 indicates severe stenosis, whereas your value of 0.60 is well above this threshold, consistent with the valve area measurements.
Additional Context
Your report correctly describes "mild stenosis" with mildly thickened and calcified cusps. The preserved ejection fraction (60-65%) and normal left ventricular size indicate the heart is compensating well without significant hemodynamic compromise from the valve disease 3.
The consistency across all three measurement methods (planimetry, continuity equation VTI, and peak velocity) strengthens confidence in the diagnosis of mild aortic stenosis 4, 5.