What is the anion gap?

Medical Advisory BoardAll articles are reviewed for accuracy by our Medical Advisory Board
Educational purpose only • Exercise caution as content is pending human review
Article Review Status
Submitted
Under Review
Approved

Last updated: October 7, 2026 • View editorial policy

Have a follow-up question?

Our Medical A.I. is used by practicing medical doctors at top research institutions around the world. Ask any follow up question and get world-class guideline-backed answers instantly.

Anion Gap Calculation

The anion gap is calculated as: (Na⁺) - (Cl⁻ + HCO₃⁻) in mEq/L 1.

Formula Details

The standard formula uses three readily available serum electrolytes:

  • Sodium (Na⁺) minus the sum of Chloride (Cl⁻) and Bicarbonate (HCO₃⁻)

Some laboratories include potassium in the calculation: (Na⁺ + K⁺) - (Cl⁻ + HCO₃⁻), which yields values approximately 4 mEq/L higher 2. However, the three-electrolyte formula without potassium is the standard approach recommended in clinical guidelines 1.

Normal Reference Range

The normal anion gap range is 10-18 mEq/L based on modern laboratory techniques 2. This represents a verified reference interval using current analytical methods. The median normal value is approximately 13 mEq/L 2.

Historically, textbooks cited normal ranges of 8-12 mEq/L, but these values were established with older laboratory techniques. Despite concerns that modern equipment might yield lower values, recent validation studies confirm the 10-18 mEq/L range remains appropriate 2.

Clinical Interpretation

High Anion Gap (>18 mEq/L)

An elevated anion gap indicates accumulation of unmeasured anions and suggests high anion gap metabolic acidosis (HAGMA). Common causes include 1, 3:

  • Lactic acidosis
  • Diabetic ketoacidosis (DKA: AG >10-12 mEq/L depending on severity)
  • Alcoholic ketoacidosis
  • Toxic ingestions (salicylate, methanol, ethylene glycol)
  • Chronic renal failure

For screening purposes, an AG ≥15 mEq/L provides 98.1% sensitivity for detecting organic acidosis 4, making it an appropriate threshold when high sensitivity is desired.

Important Corrections

Hypoalbuminemia falsely lowers the anion gap 5. For every 1 g/dL decrease in albumin below 4 g/dL, add approximately 2.5 mEq/L to the calculated anion gap to obtain the corrected value 5.

Clinical Context Matters

The anion gap must always be interpreted alongside:

  • Arterial pH and bicarbonate to confirm metabolic acidosis
  • Clinical presentation and history
  • Specific organic acid measurements (lactate, ketones, salicylate) when HAGMA is suspected 1, 3

The anion gap calculation serves as a rapid screening tool that directs further diagnostic evaluation, but it should be repeated as the clinical picture evolves 4.

References

Professional Medical Disclaimer

This information is intended for healthcare professionals. Any medical decision-making should rely on clinical judgment and independently verified information. The content provided herein does not replace professional discretion and should be considered supplementary to established clinical guidelines. Healthcare providers should verify all information against primary literature and current practice standards before application in patient care. Dr.Oracle assumes no liability for clinical decisions based on this content.