ICU Respiratory Therapist Shift Report: Essential Elements
Your shift report should follow a structured, safety-focused format that includes: patient identification and diagnosis, current respiratory support settings and parameters, oxygenation/ventilation status with recent blood gases, airway management details, interventions performed during your shift, response to treatments, current problems requiring ongoing attention, and the plan for the next shift. 1
Core Structure for Your RT Story
1. Patient Identification & Respiratory Status
- Patient name, age, admission diagnosis, and ICU day
- Current respiratory support mode (invasive ventilation, NIV, high-flow nasal oxygen, conventional oxygen)
- Specific ventilator settings: mode, tidal volume, respiratory rate, PEEP, FiO2
- Most recent SpO2 and arterial blood gas results (PaO2/FiO2 ratio if ARDS) 2
2. Airway Management Details (Critical Safety Element)
- Endotracheal tube depth at the teeth/lips - document and verify this was checked during your shift 1, 3
- Cuff pressure measurements and adjustments made
- Tube security and any concerns about displacement risk
- For tracheostomy patients: type, size, and any special considerations 1
- Red flags: Any high-risk periods identified (prone positioning, patient agitation, sedation holds) 1
3. Interventions You Performed
- Ventilator adjustments made and rationale (weaning attempts, PEEP titration, mode changes)
- Suctioning frequency and secretion characteristics
- Bronchodilator treatments given and patient response
- Recruitment maneuvers or lung-protective ventilation strategies 2
- Proning/supine positioning changes 2
- Any troubleshooting (circuit changes, addressing alarms, managing tube issues)
4. Patient Response & Trends
- Changes in oxygenation or ventilation during your shift
- Work of breathing assessment
- Ventilator synchrony or dyssynchrony noted
- Weaning readiness assessment if applicable 4
- Any deterioration or improvement in respiratory status
5. Current Problems Requiring Attention
- Ongoing respiratory issues (refractory hypoxemia, high PEEP requirements, difficult ventilation)
- Equipment concerns (HME filter status, circuit integrity, ventilator alarms)
- Secretion management challenges
- Extubation readiness or barriers to weaning 4
- Any "red flag" safety concerns about airway displacement risk 1
6. Plan for Next Shift
- Specific respiratory goals (wean FiO2, trial spontaneous breathing, adjust PEEP)
- Scheduled interventions (bronchodilators due, planned suctioning frequency)
- Monitoring priorities (watch for auto-PEEP, assess for extubation readiness)
- Anticipated changes or procedures (planned extubation, tracheostomy, bronchoscopy)
Communication Framework
Use the COAST mnemonic adapted for respiratory care 5:
- Code status (especially relevant for ventilator decisions)
- Oxygen/ventilation status and settings
- Airway details (tube type, depth, security, cuff pressure)
- Safety concerns (displacement risk, high-risk activities planned)
- Tubes/drains (ET tube, chest tubes if present)
Common Pitfalls to Avoid
Don't just read off ventilator settings - explain what you did and why, and how the patient responded. The oncoming RT needs context, not just numbers 1.
Never skip airway safety details - tube depth and cuff pressure are non-negotiable safety checks that must be communicated 1, 3. Multiple guidelines emphasize that prolonged intubation, secretions, and procedures all risk blockage and displacement 1.
Identify high-risk periods explicitly - if the patient will need turning, prone positioning, or has agitation issues, flag this as it increases airway displacement risk 1.
Document failed interventions - if you tried to wean and the patient didn't tolerate it, this is critical information 4. The oncoming RT needs to know what didn't work, not just what did.
Communicate equipment issues proactively - if the HME filter is getting wet, if there are circuit leaks, or if specific ventilator alarms are problematic, state this clearly 1.
Bedside Handoff Best Practice
Conduct your report at the bedside when possible 5, 6. This allows you to:
- Verify tube depth together visually
- Check cuff pressure in real-time
- Assess patient work of breathing together
- Review ventilator settings and alarms directly
- Identify any immediate safety concerns
Use standardized documentation - many ICUs use checklists or structured forms to ensure consistency 7, 8, 9. If your unit doesn't have one, advocate for it, as standardization reduces communication failures and improves patient safety 1.