CPT Code for Hardware Removal from Left Clavicle After ORIF
The procedural code for removal of internal fixation hardware from a left clavicle is CPT 20680 (removal of implant; deep [e.g., buried wire, pin, screw, metal band, nail, rod or plate]).
Code Selection
- CPT 20680 is the appropriate code for removal of deep orthopedic hardware, which includes plates and screws used in clavicle ORIF
- This code applies regardless of whether the hardware is removed from the right or left side—laterality does not change the CPT code
- The code covers removal of any combination of plates, screws, or other deep fixation devices from the clavicle
Important Coding Considerations
No separate code exists for clavicle-specific hardware removal. CPT 20680 is a general code for deep implant removal from any anatomic location. The specific anatomic site (left clavicle) should be documented in the operative note but does not require a different code.
Common Pitfalls to Avoid:
- Do not use CPT 20670 (removal of implant; superficial)—clavicle plates and screws are considered deep hardware
- Do not code separately for each piece of hardware removed—CPT 20680 covers removal of all hardware during a single operative session
- Ensure proper documentation of the indication for removal (symptomatic hardware, infection, patient request, etc.) as this affects medical necessity and reimbursement
Clinical Context
While the provided evidence discusses indications and timing for hardware removal 1, 2, 3, 4, 5, the actual procedural coding remains consistent: CPT 20680 for any deep hardware removal from the clavicle, regardless of whether removal is for infection, symptomatic hardware, patient preference, or prophylactic reasons.
The evidence shows hardware removal rates after clavicle ORIF range from 6.6% to 28% depending on plate type and patient factors 2, 3, 6, 4, with common indications including implant irritation, patient request, and infection 4, 5.