What is a PleurEvac Chest Tube?
A PleurEvac is not a chest tube itself—it is a brand name for a traditional three-chamber underwater seal drainage system that connects to a chest tube to drain air or fluid from the pleural space. The chest tube (also called thoracostomy tube or intercostal drain) is the catheter inserted into the pleural cavity, while the PleurEvac is the collection device attached to it 1.
Understanding the Components
The Chest Tube
- A flexible plastic catheter inserted through the chest wall into the pleural space or mediastinum 2
- Used to remove air (pneumothorax), fluid (pleural effusion), blood (hemothorax), pus (empyema), or chyle 2
- Available in various sizes, typically measured in French (F) gauge
- Small-bore tubes (≤14F) are recommended as first-line for most indications including spontaneous pneumothorax and pleural effusions 3, 4
- Large-bore tubes (20-24F) may be needed for large air leaks or after small-bore tube failure 5
The PleurEvac Drainage System
The PleurEvac represents the traditional underwater seal bottle system that has been used since the early 1900s 5. All chest tubes must be connected to a unidirectional flow drainage system (such as the PleurEvac underwater seal bottle) which must be kept below the level of the patient's chest at all times 1.
How the PleurEvac System Works
The drainage system allows unidirectional flow of air or fluid out of the chest through several mechanisms 1:
Key Features:
- Underwater seal: A tube placed under water at approximately 1-2 cm depth prevents air from re-entering the pleural space
- Side vent: Either allows escape of air or connects to a suction pump
- Visual indicators:
- Bubbling indicates air in the pleural space (pyopneumothorax)
- Continuous bubbling suggests ongoing visceral pleural air leak
- Respiratory swing in fluid confirms tube patency and proper positioning 1
Important Operational Principles:
- The bottle must remain below chest level at all times to prevent backflow 1
- A bubbling chest drain should never be clamped as this risks converting a simple pneumothorax into life-threatening tension pneumothorax 5
- If suction is used, it should be high volume, low pressure (5-10 cm H₂O for pleural infection; -10 to -20 cm H₂O for pneumothorax) 1, 5
Suction Recommendations
Suction should not be routinely applied immediately after chest tube insertion 6. The most recent 2025 guidelines recommend against systematic suction application 6. Instead:
- For pneumothorax: Suction can be added after 48 hours for persistent air leak or failure to re-expand 5
- For pleural effusion: Decision should be case-by-case based on clinical tolerance and effectiveness of passive "water seal" drainage 6
- Appropriately trained nursing staff must supervise any chest drain suction use 1
Limitations of PleurEvac Systems
The traditional PleurEvac has several disadvantages 1:
- Requires inpatient management
- Limits patient mobilization
- Risk of knocking the bottle over
- Obligatory below-chest positioning restricts movement
Modern Alternatives
Digital drainage systems (like Medela Thopaz) are increasingly replacing traditional PleurEvac systems 7. These newer devices offer:
- Objective digital measurement of drainage
- Silent operation
- Reliable pressure regulation
- Enhanced patient mobility
- Reduced need for chest X-rays (4.29 vs 8.41 mean X-rays) 7
- Shorter drainage duration (10.64 vs 16.87 days mean) 7
However, the PleurEvac and similar underwater seal systems remain widely used and effective, particularly in resource-limited settings or when digital systems are unavailable 8, 2.
Critical Safety Points
Common pitfalls to avoid:
- Never clamp a bubbling chest tube 1, 5
- Never allow the drainage system to rise above chest level 1
- Never use sharp metal trocars for insertion—use blunt dissection or Seldinger technique 1
- Do not routinely apply suction immediately after insertion 6
- Ensure respiratory swing is visible to confirm proper tube positioning 1