How to Calculate Rescue Doses of Regular Insulin for Hyperglycemic Episodes
For correction (rescue) doses of regular insulin, use the insulin sensitivity factor (ISF) formula: 1500 divided by the patient's total daily insulin dose (TDD), which gives you the expected blood glucose drop in mg/dL per 1 unit of regular insulin. 1
Step-by-Step Calculation Method
1. Determine the Insulin Sensitivity Factor (ISF)
- Formula for regular insulin: ISF = 1500 ÷ TDD
- For rapid-acting insulin analogs, use 1800 ÷ TDD instead 1
- Example: If a patient uses 50 units/day total, their ISF = 1500 ÷ 50 = 30 mg/dL per unit
2. Calculate the Correction Dose
Correction dose = (Current glucose - Target glucose) ÷ ISF
- Set target glucose based on clinical context (typically 100-150 mg/dL for hospitalized patients) 2
- Example: If glucose is 280 mg/dL, target is 130 mg/dL, and ISF is 30:
- (280 - 130) ÷ 30 = 5 units of correction insulin
3. Timing Considerations for Regular Insulin
Critical difference from rapid-acting analogs:
- Regular insulin should be given every 6 hours (not every 4 hours) when used for correction doses in patients who are not eating 2
- This accounts for regular insulin's longer duration of action (4-6 hours) 1
- Give before meals if patient is eating, following the meal within 30 minutes 3
Practical Sliding Scale Approach (When ISF Unknown)
If you don't know the patient's TDD, use this standardized correction scale 2:
Choose the appropriate column based on patient characteristics:
Insulin-Sensitive Column (start here for):
- Elderly patients (≥70 years)
- Patients not eating
- Renal impairment (GFR <60 mL/min)
- Low body weight
Usual Column (standard patients):
- Most hospitalized patients with diabetes
Insulin-Resistant Column (for):
- Patients on corticosteroids
- Those requiring >80 units/day at home
- Obesity
Correction Doses by Glucose Range:
| Blood Glucose (mg/dL) | Insulin-Sensitive | Usual | Insulin-Resistant |
|---|---|---|---|
| 141-180 | 2 units | 4 | 6 |
| 181-220 | 4 units | 6 | 8 |
| 221-260 | 6 units | 8 | 10 |
| 261-300 | 8 units | 10 | 12 |
| 301-350 | 10 units | 12 | 14 |
| 351-400 | 12 units | 14 | 16 |
| ≥400 | 14 units | 16 | 18 |
Important Caveats
Avoid insulin stacking: Regular insulin has a 4-6 hour duration of action 1. Do not give another correction dose within 6 hours unless using a formal calculation that accounts for "insulin on board" from the previous dose.
Bedtime dosing: Give only half the calculated correction dose at bedtime to reduce nocturnal hypoglycemia risk 2.
Correction insulin alone is inadequate: If a patient requires correction doses with ≥2 blood glucose readings ≥180 mg/dL in 24 hours, you must add scheduled basal and nutritional insulin—correction insulin alone leads to poor control 2, 4. The traditional "sliding scale only" approach is explicitly discouraged and associated with 3-fold increased hyperglycemia risk 2.
Adjust the scale: If a patient consistently requires correction doses, increase their scheduled basal or prandial insulin rather than relying on repeated corrections 5.