How many clicks are needed for a 0.25 mg dose of Ozempic (semaglutide) and do I need to prime the pen?

Ozempic Pen Dosing Instructions for 0.25 mg Dose

For a 0.25 mg dose of Ozempic using the 0.25 mg/pen, you need to dial to 1 click (which equals 0.25 mg) and yes, you must prime the pen before the first use.

Pen Preparation and Priming Instructions

First-Time Pen Preparation:

1. Check the pen: Ensure you have the correct Ozempic pen (0.25 mg/pen)
2. Prime the pen before first use:
   • Remove the pen cap
   • Check that the solution is clear and colorless
   • Attach a new needle
   • Hold the pen with the needle pointing upward
   • Turn the dose selector until the dose counter shows the priming symbol (flow check symbol)
   • Press and hold the dose button until the dose counter returns to 0 and a drop appears at the needle tip

For Your 0.25 mg Dose:

• After priming, turn the dose selector to select 1 click (which equals 0.25 mg)
• Insert the needle as directed by your healthcare provider
• Press and hold the dose button until the dose counter shows 0
• Keep the button pressed and count slowly to 6 before removing the needle

Important Notes:

• Priming is only needed before the first injection with each new pen
• For subsequent doses with the same pen, priming is not required
• The 0.25 mg/pen is specifically designed so that 1 click equals 0.25 mg
• Store unused pens in the refrigerator (36°F to 46°F)
• After first use, the pen can be stored at room temperature (below 86°F) for up to 56 days

Potential Side Effects to Monitor:

• Gastrointestinal effects are common when starting Ozempic (nausea, vomiting, diarrhea)
• These side effects are typically mild to moderate and decrease over time
• Stay well hydrated, especially if you experience gastrointestinal side effects

Remember to dispose of used needles properly in a sharps container and never reuse needles.