How to Use the Ozempic Pen for Injection
Follow these step-by-step instructions to correctly administer Ozempic using the prefilled pen-injector, ensuring proper technique to maximize medication delivery and minimize complications.
Pre-Injection Preparation
Step 1: Assemble Your Supplies
Gather the following before starting 1:
- Ozempic pen (check the colored label to confirm it's Ozempic)
- New NovoFine Plus or NovoFine needle (up to 8mm length; 32G 4mm needles are included)
- Alcohol swab
- Gauze pad or cotton ball
- Sharps disposal container
Step 2: Prepare the Pen
- Wash your hands with soap and water
- Remove the pen cap and inspect the medication through the pen window—it must be clear and colorless. Do not use if cloudy or contains particles 1
- Attach a new needle: Remove the paper tab, push the needle straight onto the pen, and turn until tight 1
- Remove both needle caps: Pull off the outer needle cap (save it for later) and discard the inner needle cap 1
Critical Safety Point: The inner needle cover must be removed before injection—failure to do so is a common mistake that prevents medication delivery and can lead to hyperglycemia or diabetic ketoacidosis 2.
Prime the Pen (New Pens Only)
For the first injection with each new pen only 1:
- Turn the dose selector until the flow check symbol (⚠) appears
- Hold the pen with needle pointing up
- Press and hold the dose button until the dose counter shows "0" (must align with dose pointer)
- Confirm a drop of Ozempic appears at the needle tip
- If no drop appears, repeat up to 6 times; if still no drop, change the needle and try once more
- Contact Novo Nordisk (1-888-693-6742) if no drop appears after these attempts
This priming step ensures medication flows properly and prevents injecting air instead of medication 1.
Select Your Dose
Turn the dose selector until your prescribed dose appears in the dose counter 1:
- For 0.25 mg or 0.5 mg pens: Dial to 0.25 mg or 0.5 mg as prescribed
- For 1 mg pens: Dial until the counter stops at 1 mg
The dose must line up exactly with the dose pointer. You'll hear clicks as you turn—do not count clicks to set your dose; always use the dose counter 1.
Injection Technique
Choose and Prepare Injection Site
- Select an injection site (abdomen, thigh, or upper arm as instructed by your provider)
- Avoid injecting into scars, stretch marks, tattoos, or areas with edema, infection, inflammation, or ulceration 2
- Never inject through clothing—this prevents proper skin examination and needle verification 2
- Wipe the site with an alcohol swab and let it dry completely 1
Perform the Injection
For most adults using a 4-5mm needle 2:
- Hold the pen perpendicular to the skin (90° angle), regardless of whether you perform a skin lift 2
- Insert the needle fully into the skin
- Ensure you can see the dose counter—do not cover it with your fingers, as this can stop the injection 1
- Press and hold the dose button completely with steady, even pressure until the dose counter shows "0" (must align with dose pointer) 2, 1
- You may hear or feel a click 1
- Keep the needle in your skin and count slowly to 6 after the dose counter returns to "0"—this reduces medication leakage 2, 1
The 10-second wait recommendation from general injection guidelines can be shortened to 3-10 seconds, but counting to 6 is the manufacturer's specific instruction for Ozempic 2, 1.
Remove the Needle
- Pull the needle straight out of your skin
- Place the outer needle cap back on the needle
- Dispose of the needle in a sharps container 1
Post-Injection Care
Remove the pen needle after each use—this prevents air from entering the cartridge, which affects dosing accuracy 2. Never reuse needles, as they become non-sterile, blunted, or misshapen, increasing pain and risk of lipohypertrophy 2.
Recognizing Injection Problems
Watch for signs of unsuccessful injection 2:
- Insulin leakage: Droplets at the needle tip or wetness at the injection site
- Intradermal injection: Bump on the skin or swelling at the injection site
If these occur, you may not have received your full dose.
Storage and Disposal
- In-use pens: Store at room temperature or refrigerated; discard after 56 days even if medication remains 1
- Unused pens: Keep refrigerated until the expiration date; do not store directly next to the cooling element 1
- Never freeze Ozempic—discard if frozen 1
- Keep away from heat and light; store with pen cap on 1
Common Pitfalls to Avoid
- Forgetting to remove the inner needle cap—this is the most critical error that prevents medication delivery 2
- Not waiting 6 seconds after injection—removing the needle too quickly causes medication leakage 2, 1
- Covering the dose counter during injection—this can prevent complete medication delivery 1
- Reusing needles—increases infection risk and injection pain 2
- Injecting through clothing—prevents proper technique verification 2
- Not priming new pens—may result in air injection instead of medication 1
The Ozempic pen has demonstrated ease of use in clinical testing, with mean ease-of-use ratings of 6.9 out of 7, and no serious use errors occurred in validation studies 3. The injection experience with semaglutide has been rated as less painful compared to other GLP-1 receptor agonists 4.