Hemolyzed Blood Samples Falsely Elevate Serum Phosphorus Levels
Hemolyzed blood samples cause spuriously elevated phosphorus levels and should never be analyzed for phosphorus measurement. 1
Mechanism of Interference
When red blood cells rupture (hemolysis), intracellular phosphorus—which exists at much higher concentrations inside cells than in serum—is released into the sample, artificially increasing the measured phosphorus level. This creates a false elevation that does not reflect the patient's true serum phosphorus status.
Degree of Impact by Hemolysis Severity
The phosphorus elevation occurs across all degrees of hemolysis:
- Moderate hemolysis: Significantly increases plasma phosphorus levels 2
- Marked hemolysis: Further increases phosphorus values 2
- Any visible hemolysis: Produces clinically meaningful variations in phosphorus that exceed acceptable error limits 3
Research consistently demonstrates that phosphorus measurements in hemolyzed samples exceed Clinical Laboratory Improvement Amendments (CLIA) total allowable error limits, even at low levels of hemolysis 1, 4. One study found that percentage differences in phosphorus remained beyond acceptance criteria across all dilutions of hemolyzed samples 1.
Clinical Recommendation
Reject all hemolyzed samples for phosphorus measurement and request a new specimen. 1 Unlike some analytes (such as BUN, creatinine, or amylase) that may tolerate mild hemolysis, phosphorus cannot be reliably measured in any degree of hemolyzed sample.
Quality Control Measures
Guidelines emphasize that hemolysis significantly deteriorates sample quality 5. Laboratory staff should:
- Inspect all samples for hemolysis using standardized reference charts (such as the CDC Hemolysis Reference Palette) 5
- Document hemolysis severity during specimen collection 6, 5
- Flag results when hemolysis is detected, as red or pink discoloration indicates significant hemolysis that renders samples unreliable for many analytes 6
Common Pitfall to Avoid
Do not attempt to "correct" or apply conversion factors to phosphorus results from hemolyzed samples—these adjustments are inaccurate and unreliable 7. The only appropriate action is sample rejection and recollection using proper phlebotomy technique to minimize hemolysis risk.