Basic Principles of Mechanical Ventilation
The fundamental principle of mechanical ventilation is to reduce work of breathing while avoiding ventilator-induced lung injury through careful attention to tidal volumes, airway pressures, and synchronization with the patient's intrinsic respiratory rhythm 1.
Core Physiological Concepts
Mechanical ventilation operates through the equation of motion: Pressure = (Volume/Compliance) + (Flow × Resistance) + PEEP. Understanding this relationship is essential for manipulating ventilator settings safely 2.
Critical Parameters to Monitor
Tidal Volume: Target 4-8 mL/kg predicted body weight (PBW), with PBW calculated as:
- Males: 50 + 0.91 × [height (cm) - 152.4] kg
- Females: 45.5 + 0.91 × [height (cm) - 152.4] kg 3
Plateau Pressure: Must remain <30 cm H₂O to prevent alveolar overdistention 3
Driving Pressure (Plateau Pressure - PEEP): Emerging as a better predictor of outcomes than tidal volume or plateau pressure alone 3
PEEP: Prevents alveolar collapse and reduces cyclic recruitment/derecruitment injury 3
The Ventilator Breath Cycle
Every mechanical breath consists of four phases that must be understood independent of manufacturer terminology 2:
- Triggering: How the breath is initiated (patient effort or time-based)
- Delivery: How gas is delivered (pressure-controlled vs. volume-controlled)
- Cycling: How inspiration transitions to expiration
- Expiration: Passive exhalation phase
Fundamental Ventilation Strategy
For patients with ARDS, use low tidal volume ventilation (4-8 mL/kg PBW) with plateau pressures <30 cm H₂O 3. This recommendation is based on meta-analysis showing that larger tidal volume gradients (difference between low and traditional volumes) correlate with lower mortality (P = 0.002) 3.
PEEP Management
- Moderate-to-severe ARDS (PaO₂/FiO₂ <200): Use higher PEEP levels (adjusted RR 0.90; 95% CI 0.81-1.00) 3
- Mild ARDS: Higher PEEP shows no mortality benefit and may be harmful (adjusted RR 1.29; 95% CI 0.91-1.83) 3
Additional Strategies for Severe ARDS
Prone positioning >12 hours daily reduces mortality in severe ARDS (RR 0.74; 95% CI 0.56-0.99) 3. This works by improving ventilation-perfusion matching and distributing tidal volume more uniformly 3.
Patient-Ventilator Synchrony
The primary goal is minimizing work of breathing through careful alignment of ventilator cycling with the patient's respiratory center output 1. Problems arise at three critical points:
- Trigger phase: Delayed or missed triggers increase work
- Post-trigger inflation: Flow mismatch causes patient distress
- Inspiration-expiration switchover: Premature or delayed cycling increases effort
Iterative adjustments of sensitivity, flow rates, and cycling criteria are required—protocols for ventilator settings can lead to complications and increased mortality risk 1.
Common Pitfalls to Avoid
- Using protocols rigidly: Ventilator settings must be individualized based on respiratory mechanics, not standardized protocols 1
- Ignoring driving pressure: Focus on ΔP (plateau - PEEP) as it better predicts outcomes than volume or pressure alone 3
- Inadequate PEEP in severe ARDS: Leads to atelectrauma from cyclic recruitment/derecruitment 3
- Excessive tidal volumes: Even 8 mL/kg may be too high; consider targets <6 mL/kg when plateau pressures approach 30 cm H₂O 3
- Prolonged ventilation: Screen daily for weanability using predictor tests; use T-tube trials rather than pressure support to assess true work of breathing 1
Monitoring Respiratory Mechanics
The ventilator provides diagnostic data on:
- Static compliance: Reflects lung and chest wall stiffness
- Airway resistance: Indicates bronchospasm or secretions
- Time constants: Determine appropriate inspiratory and expiratory times 2, 4
These parameters guide real-time adjustments to optimize ventilation while minimizing injury risk 4.