What are Type I and Type II errors in hypothesis testing, how is one described, what are the steps for testing the difference between two group means, what does a 95% confidence interval of 6.0–7.2 kg for a sample mean of 6.4 kg (n=100) imply, what is the estimated standard deviation of weight, and which statistic should be used to compare the dispersion of children’s heights to their weights?

Medical Advisory BoardAll articles are reviewed for accuracy by our Medical Advisory Board
Educational purpose only • Exercise caution as content is pending human review
Article Review Status
Submitted
Under Review
Approved

Last updated: November 18, 2026 • View editorial policy

Have a follow-up question?

Our Medical A.I. is used by practicing medical doctors at top research institutions around the world. Ask any follow up question and get world-class guideline-backed answers instantly.

Question 9: Hypothesis Testing Errors and Procedures

a. Two Types of Errors in Hypothesis Testing

The two types of errors in hypothesis testing are Type I error (false positive) and Type II error (false negative). 1, 2

  • Type I error (α): Rejecting the null hypothesis when it is actually true—concluding a difference exists when it does not
  • Type II error (β): Failing to reject the null hypothesis when it is actually false—concluding no difference exists when one actually does exist

b. Description of Type I Error

Type I error occurs when you incorrectly conclude that a difference exists between groups being compared when, in reality, no difference exists. 2

This is analogous to a false positive result. The probability of committing a Type I error is denoted by α (alpha), conventionally set at 0.05 or 5%. This means you accept a 5% risk of falsely claiming a significant difference. 1, 3, 2

When performing multiple comparisons, the chance of Type I error increases substantially, which is why post hoc tests include corrections (such as Tukey's HSD) to maintain the initial significance level. 1 For example, if you perform 20 independent tests at α = 0.05, you would expect one false positive result purely by chance.

c. Steps for Hypothesis Testing Comparing Two Group Means

The systematic approach to comparing two group means follows these algorithmic steps: 1, 4

Step 1: State the Hypotheses

  • Null hypothesis (H₀): The two group means are equal (no difference)
  • Alternative hypothesis (H₁): The two group means are different (two-sided test) or one is greater/less than the other (one-sided test)

Step 2: Choose the Appropriate Test

  • For normally distributed data with equal variances: Use unpaired t-test
  • For normally distributed data with unequal variances: Use Welch's t-test
  • For non-normally distributed data or presence of outliers: Use Mann-Whitney U test (non-parametric alternative) 1

Step 3: Set the Significance Level

  • Conventionally set α = 0.05 (5% Type I error rate) 1, 3

Step 4: Calculate the Test Statistic

  • For t-test: Calculate the t-statistic as the scaled difference between sample means, which follows a Student's t-distribution under the null hypothesis 1
  • For Mann-Whitney U test: Rank all observations, calculate rank sums, and compute the U-statistic 1

Step 5: Determine the P-value

  • Compare the calculated test statistic to its theoretical distribution
  • Report exact P-values (e.g., P = 0.03) rather than using symbols like P < 0.05 5

Step 6: Make a Decision

  • If P ≤ α: Reject the null hypothesis (statistically significant difference exists)
  • If P > α: Fail to reject the null hypothesis (insufficient evidence of difference)
  • Critical caveat: Absence of evidence is not evidence of absence—a non-significant result does not prove groups are identical 5

Step 7: Report Results with Effect Size and Confidence Intervals

  • Always report the mean difference with 95% confidence intervals alongside the P-value
  • Include group means, standard deviations, and sample sizes 5, 6

Question 10: Confidence Intervals and Statistical Measures

a. Interpretation of 95% Confidence Interval (6.0 kg to 7.2 kg)

This statement means that we are 95% confident that the true population mean weight of children in Agogo lies between 6.0 kg and 7.2 kg. 7, 6

More precisely, if we repeated this study many times with different random samples of 100 children from the same population, approximately 95% of the calculated confidence intervals would contain the true population mean. 6 The confidence interval provides both statistical significance information (since it doesn't include extreme values that would suggest measurement error) and clinically meaningful information about the actual range of plausible values for the population mean. 6

b. Calculating Standard Deviation from Confidence Interval

To calculate the standard deviation, use the relationship between the confidence interval width and the standard error:

Given:

  • Sample mean (x̄) = 6.4 kg
  • 95% CI: 6.0 kg to 7.2 kg
  • Sample size (n) = 100

Calculation steps:

  1. Margin of error = (Upper limit - Lower limit) / 2 = (7.2 - 6.0) / 2 = 0.6 kg

    • Alternatively: Upper limit - Mean = 7.2 - 6.4 = 0.8 kg (using upper bound)
    • Or: Mean - Lower limit = 6.4 - 6.0 = 0.4 kg (using lower bound)
    • Note: The CI appears asymmetric, but using the average: (0.8 + 0.4)/2 = 0.6 kg
  2. Standard error (SE) = Margin of error / 1.96 (for 95% CI)

    • SE = 0.6 / 1.96 = 0.306 kg
  3. Standard deviation (SD) = SE × √n

    • SD = 0.306 × √100 = 0.306 × 10 = 3.06 kg

The estimated standard deviation of children's weights is approximately 3.06 kg.

c. Statistic for Comparing Dispersion of Height vs. Weight

The coefficient of variation (CV) is the appropriate statistic to compare the spread of height against weight.

The coefficient of variation is calculated as:

  • CV = (Standard Deviation / Mean) × 100%

Rationale: Height and weight are measured on completely different scales (centimeters vs. kilograms) with different means and variances. You cannot directly compare their standard deviations because a 5 cm variation in height has entirely different meaning than a 5 kg variation in weight. 5

The CV standardizes the variability by expressing it as a percentage of the mean, making it dimensionless and allowing meaningful comparison of dispersion across variables measured in different units. This addresses the fundamental principle that you cannot rank variables in terms of strength of association or variability when they are on different scales without standardization. 5

References

Research

Biostatistics Series Module 5: Determining Sample Size.

Indian journal of dermatology, 2016

Research

Testing differences between two samples of continuous data.

Australian critical care : official journal of the Confederation of Australian Critical Care Nurses, 2010

Research

A practical guide for understanding confidence intervals and P values.

Otolaryngology--head and neck surgery : official journal of American Academy of Otolaryngology-Head and Neck Surgery, 2009

Research

Statistical Inference (Part 3): Statistical Hypothesis Testing and Confidence Interval Estimation.

The Brazilian journal of infectious diseases : an official publication of the Brazilian Society of Infectious Diseases, 1998

Related Questions

What should be included in the annual physical examination for a generally healthy 53-year-old male?
What does the term "Asmita bacteria" refer to and how should it be managed in a patient with a positive culture?
What are the normal values for a 75‑gram oral glucose tolerance test in pregnancy?
How should a 9‑month‑old male infant with minor anterior nasal bleeding after a fall be managed, given that he is alert, playing, has no vomiting, facial swelling, or other concerning signs?
In a patient with bilateral conjunctivitis, ear pain, fever of 102 °F (≈38.9 °C), and sore throat, what are the possible differential diagnoses?
Which antibiotics are appropriate for treating an uncomplicated urinary tract infection in a patient taking amiodarone?
What is a stillbirth?
What is the recommended monitoring strategy for an asymptomatic healthy adult with elevated hemoglobin (>20 g/dL) and elevated hematocrit (>50 %)?
In a patient with a left ventricular ejection fraction of 20–25%, documented sustained ventricular tachycardia, and paroxysmal atrial fibrillation, is a dual-chamber implantable cardioverter‑defibrillator indicated?
If a family member was diagnosed with colon cancer at age 31, what screening and genetic evaluation should their children undergo?
What are the definitions and key concepts of incidence, prevalence, DOTS (Directly Observed Treatment, Short‑course), how to report an outbreak to the minister of health from the community level, the basic formulas and graphs used to summarize data, characteristics of a good sample, demographic transition theory, epidemiologic transition theory, unsafe abortion, causes of diarrhea, sources and examples of water pollution, how to address a community complaint about a hospital worker, hazards in a laboratory and hazards from wood cutting, and the functions of a port health officer?

Professional Medical Disclaimer

This information is intended for healthcare professionals. Any medical decision-making should rely on clinical judgment and independently verified information. The content provided herein does not replace professional discretion and should be considered supplementary to established clinical guidelines. Healthcare providers should verify all information against primary literature and current practice standards before application in patient care. Dr.Oracle assumes no liability for clinical decisions based on this content.